Search Results for ‘pin’

Stopped in today with my wife, what a great place. The only complaint is the coffee is bad... but I made it, so I guess that's my fault. Seriously, the best part of the place is my wife liked it, liked talking to the fellas behind the counter, and she felt comfortable. She is coming back and...

Hello Everyone! I stopped by the new Indoor Shooting Range "The Firing Pin" in Bergen New York today for some range time. If you are coming from Rochester, Take the Bergen Exit, then Turn Right. Take another immediate Right Turn about 100ish yards (it'll be the first road on the right). You'll...

I am new here, I don't know how many cap loc or inline BP shooters we have but I heard some news last night that i think needs to be put out. I heard there have been accidental firings of CVA break action guns, when the primer is put in the breech plug and the gun closed is when these firings...

I have a pistol in which the firing pin broke. It's highly doubtful that I'd be able to find a replacement for it. (Its a .22 conversion kit for a Makarov.) Does anyone have an idea where I could get a new one made?

Post in this thread for a chance to win this 12x18" double sided US Marine Corps nylon flag. This flag has a canvas header, brass grommets, double stitch reinforced with quad stitching on the fly end. Also includes a Marine Corps tie tack / lapel pin! I would like to see this go to a...

I decided to take apart my g30 slide because there was some lint and crap in the extractor and I have never taken the slide apart on this Glock so I take it apart and notice the tip of the firing pin is gone, this gun is not my main daily carry gun so I haven't shot it in about 6 months. I'm...

I get delayed about 95% of the time on the NICS checks on both long guns and handguns, I just recieved my "Unique Pin Number" from the FBI a couple of days ago. It took three months and four days from the day I mailed the application to the FBI in West Virginia to the day I recieved the aproved...

I just picked up my Shield 40 S&W about two weeks ago. I have since put 80 rounds through the gun over the past two days. Since I am a new handgun owner, I had no clue what drag marks on the primmer meant. I thought it was normal until the mark went all the way to the brass case. not only is...

I just bought a new 5.45 upper for my AR that I bought in 2012. Does anyone know where I can have the comp muzzle break pinned and welded in the Saratoga area? I tried MTM but I haven't been able to reach them.

Stock Pinning: Try To Remove Old Pin & Re-Pin New Or Just Get New Buffer Tube & Pin? So I got a new stock to replace my M4 stock on the M&P15. Some background: My current M4 stock is actually pinned and the castle nut is staked well. There is a little bit of a lip on the pin and I'm thinking...

A brake/comp or flash hider,I really do not know what they use.Been looking at Midway and see some in stock like the Smith Enterprise Vortex A3 Flash Hider 1/2"-28 that I see some has used.And they do have them in stock,but sorta looking for one that doesnt matter where it lines up it will be...

I am just curious what are the easier options for me to remove the pin from my AR collapsible stock? Thanks in advance

So I was just shooting my S&W 15-22 a few weeks ago and noticed my stock pin just fell out... so much for permanently pinned. I hammered it back in again, but am afraid it might fall out again. Is there somewhere I can buy pins to pin the stock better? Kinda disappointed in S&W because if I...

As the title says, anyplace in Western/Central NY recommended for doing compliance work? I have an AR upper that I'm fond of that I'd like done perfectly. Normally I do my own work, but this one I care a little more about.

So I was thinking of getting a Troy battle stock, or something similar as I want a little storage. Troy Battle Ax CQB Stock Problem is they are collapsable, like every stock I want, Since I dont really have any interest in going to jail, I want to keep my gun NY legal which means I cant have...

I added this to my previous post about the LAR receiver, but I decided to start a new thread to possibly help someone out later with less searching required. I have a Spikes lower receiver and a LAR upper receiver. The front pivot pin fits nicely, but the rear take down pin doesn't line up...

-Quick question Anyone know of a good gun smith to get my new barrel pinned and welded ? I am located in Westchester.

I know the wonderful mayor believes in common sense gun control here in nyc," yea right"what is the law for a rifle? it can not be a firearm if there is no bolt in it right? thanks everyone

got another norinco sks and wanted to pin on a muzzle device (muzzle break) to it to help complete the wanna be ak look cant remove the front pin from under sight any tricks i dont know?

I have a post ban Colt H bar large pin trigger,no sear block, of course this is larger than mil spec. Are the take down pins different as well? mine measures 0.245 thou. inch. I want to order a new stag upper,will it fit?