Search Results for ‘mod’

I have been noticing lately we have been seeing a lot of people asking or posting the same question over and over asking about the Tresmond case or law suit cases pertaining to NY unsafe act. I know that there our stickies on the forum pertaining to all the Treshmond cases and NY Law suits...

Drilled a hole where pistol grip was. Fitted a usgi AR floorplate. Drilled that. added a screw into the wood stock through bottom hole of rifle. now I will jb weld in the screwdriver slot in the top of the flat head screw and chop off the welded slant brake. No registration should be...

Hello i was curious if someone owned an ar-15 and purchased this mod Amazon.com: AR MR2 Mag Release Mod CA NY CT MD Legal AR15 AR10: Sports & Outdoors would it not require it to be registaered under the SAFE act? Its the AR MR2 Mag Mod release.

Here is where to pin your HK91 mags to make them 10 rounders. Just use a 4mm punch through the aluminum and install the rivet to size. bam. 10/20 magazine and its clearly been modified to a legal capacity. Easily shown to LE. maybe we can have a "how to" magazine resource for modifying our...

Canadians do this.. use a punch to ding the mag in 4 spots. Stops the follower. Can't be taken out short of destroying follower. Won't take an unmodified follower. legal 10/30 option it looks like.. Shooter? :-)

See above. Is there something in the system that keeps one from doing so?

Went out yesterday afternoon w/ my Brother-in-law to do some shooting, took along my cmp kimber 82, i had not shot it yet, have had it for 3 months.Anyway i was shooting clay pigeons at 50 yds, the sights were dead on. For being in storage for a long time, it was flawless, Now to try it out on...

I have a Sig 556 and the grip is the only evil feature. All of the compliant grips that are being made are only for the AR's and will not work for me, the sig grip and the standard AR grips are close in design but no cigar. My question is why can't the stock grip be cut off even with the bottom...

While cleaning my newly acquired S&W Mod 29-3, I noticed that the ejector rod shroud is showing a gap between the end of the shroud and the face of the frame. I you look at the top of the barrel and frame, you can see that the grooves line up fine. It seems that the barrel was tightened too...

Ok end of the year is getting closer. For those of us who do not want to register, and also do not want to sell or store out of state or any of the other B.S. Here is an easy permanent mag lock that you can do for under $5, which will allow you to keep all your evil features and avoid...

Would this make ARs mags non removable? it would be as permenant as an SKS or FN49 mag... i say yes. But I know the NYSP would LOVE to so no and likely would even though its no diff than a Remy700 mag in permenance RANGE MAG-LOK™ KIT

I finally got up the stones to break out my Dremel and have at the polymer grip on my Ruger Mark III 22/45. They (Ruger) said the frame mirrored the 1911 so I wanted to put 1911 grips on it. Ruger won't sell the removable grip frame alone (yet) so I took the liberty to do it myself and not wait...

hey doods. anyone ever modified the safety lever on their S&W M&P 40? Or heard about such a thing? it's the *only* thing I have even approaching a complaint about the platform. it's just a little too "loose", and I find at the range sometimes it's moved in the heat of battle without my intention...

Putting this here because I'm not sure if I want to sell it or not. Been wanting another Glock 23 gen IV for a while now. Have a S&W Mod 60 that I bought new in 1998. I'm sure there is less than 200 rounds through it. Stainless 5 shot Wheel gun, Snubby (I think 2 1/2" barrel but not sure...