Search Results for ‘issue’

As a NYer moving to CT, this has me more worried than I was before... this looks awfully familiar.

Hey Guys, I'm wondering if there any knowledgeable Glock guys on here that can help me with an ejection issue on my Glock 34. The problem I'm having is that the brass is sometimes ejecting back on my right arm or sometimes my head or shoulder. I did a search on the interweb and I'm not the...

My ans. may be already posted, but I used the search engine and did not find it. A buddy has a chance to buy a govt. issue 30 cal. m1 carbine. I told him I thought it would fall under the safe act B.S. because of the bayonet stud. I think he should leave it alone until after the Tresmond law...

Gearing up to reload 7.62x54R and everything I have read says you should slug the barrel since these can vary quite a bit. Rifle #1 is a m91/30 Izhevsk 1943. I have had this for a while and it shoots fine. Slugged the barrel at .311. Second is a m91/30 Izhevsk 1941. Picked this up to put in...

To All, Please see the most recent communication from Judge Skretny regarding the SAFE Act proceedings. Please do not read anything pro or con into this communication it is common practice to make decisions based on the briefs rather than verbal arguments; that's why we hired the best...

A few months ago I found something wrong w/ my 10/22. Upon reloading with an empty rifle and hearing click on my 11th trigger pull (I'm at the range), loading another round into the chamber is much more difficult then it was when I first purchased the rifle. Thinking it was the bolt, I...

Hey everyone, Just built a lower from PSA with PSA LPK. Took gun to range today and the trigger would not reset after each round was fired. I had to use the safety selector switch and flip it on and off to reset the trigger. I took apart trigger group and noticed the disconnector spring was...

Guns and Ammo Editor Supports Gun Control in Editorial Feature for December Issue - The Free Patriot "Time to cancel your subscriptions, Guns and Ammo Editor Dick Metcalf has penned an editorial for their December issue that will be leaving fans in shock; he's supporting gun control. Metcalf...

Ok, I need some quick Guidance and I know this has been discussed before but i am a little confused on the process. It has changed since the last time I purchased a handgun thanks to the current laws. I have an opportunity to purchase the following handguns; 44 Mag Super Blackhawk 45 LC...

So I think what I've decided to do is to go ahead and weld a mag into a lower but NOT my main lower. I think the next time EP lowers does one of those "blimish" sales I'm going to pick one of those up, dremel it out and put some inexpensive lower parts in it. This way I keep my real/metal...

Maryland handgun carry permits law won't be reviewed by U.S. Supreme Court - baltimoresun.com We always hope that the court is looking for a case with contradicting decisions and a good challenger with standing to take on an issue like this, but it's hard for me to see how you get much better...

Expect 100's of thousands of web hits today as well as lots of registrations. Expect media outlets to be contacting you and the site for more information. That is all. :confused:

So, I got my pistol permit in the beginning of July and I picked up a M&P 9c. Since then I have put about 600 rounds through it and hundreds of dry fires and I seem to consistently have two issues. I'm man enough to admit they are both problems with me not the firearm, but I can't seem to fix...

Odd Issue: Midwest Industries Complete Upper: Can't Charge Weapon While On M&P Lower So my new MI-16MFSS12 complete upper on my Smith & Wesson M&P15 lower. The pivot pin is very tight. When completely installed, with pins all the way in, on this lower, I cannot pull the charging handle back...

My BC date code (2012 production) PPS chambered in 9mm is producing indentations on the primer when chambering a round. Below is a picture of a Winchester PDX-1 147gr cartridge that has been chambered multiple times over the past months. I cleaned the breech face and extractor as well as I...

Hi guys, I bought a few boxes of old ammo the other day ( 7.62 X 39) . I told they should be fine but once I got home and took a look at them I found they have corrosion on the tips I did fire a few rounds and they do go down range just not very accurate. My question is, should I use them...

For those who don't, I sent an extra $20 donation to scopeny and they give you a repeal the safe act sign... I put it up and one scumbag neighbor called the town building inspector to complain. I got a letter for being in violation of a town code. As per advice on this forum from nyshooter I...

Anyone have any information on this? I've read about it seen it on TV and I hesitate to go out and buy a Rem 700. Can someone give me some informative information on this. Thanks.

A question guys,sorry to be a pain....My 870 Express has the 18" barrel on it....Will that 2 rd tube extension stick out past it ?? Otherwise Midway sells the 870 Barrels 18.5" and comes with the breacher choke.....But that is $160.00 I was hoping not to spend....Thanks a bunch....

Ok So its time to put the jeep back on the road -- the issue is a self inflicted one !!! The inspection ran out in 2011 when I stopped using it on the road due to brake issues The registration ran out in 2012 .... because of,well,... because of I just forgot to renew it. We have kept insurance...