New York Firearms Forum banner
extractor
1-8 of 8 Results
  1. Rimfire Handguns and Rifles
    Hi guys, i have a remington 522 viper that i need a pluger,spring, and extractor for. I found the plunger and spring but cannot for the life of me find an extractor for it. I know they discontinued making these, but does anybody know if i can use a different model extractor? Or do you have...
  2. Handguns
    I've got a Glock 23 Gen 4 on layaway at Gander, and was pretty much committed to it, but stumbled into another thread today where someone mentioned an apparent known issue with new Glock extractors. I had never heard of the issue until today. A quick Google search did turn up a handful of...
  3. The AR-15
    I just got a BCG for a build and the o ring is included but not in the bolt. Should I use it? Why would it come this way? I got it from JoeBobs JoeBobOutfitters Premium Complete Bolt Carrier Group (M16/AR15 BCG)-MPI Tested Here it is out of the package, in case it matters.
  4. Rifles
    I wrote about this on the Rimfire Central forum but never really got a clear answer as to whether it's normal or not; My Buckmark .22lr rifle is my most precious "feel good" rifle. Last summer I was p[linking off the back patio and I started using CCI Velocitors; 36 gn @ 1635 FPS. It was at the...
  5. General Firearms
    Anybody know how to adjust an extractor on a Marlin 80 bolt (It's actually a JC Higgins 103.16) It wouldn't grab the empty case so I tweaked the right side of it a bit and how it pulls the case out of the camber but wont' eject it. It's probably just bend a little trial and error, but I would...
  6. General Firearms
    I ask because I was shooting with my friend, he and I both have a universal M1 carbine, I learned how to do the all mighty bump fire not too long ago and I showed my little brother on the M1 carbine before letting him try the AK, because it has a bit less kick then the AK, he was able to get it...
  7. The AR-15
    Took the AR to the range last weekend and for the first time ever it failed to eject the spent casings, first time it did it the round stayed on the extractor and stovepiped, and the next round misfed. cleared the jam, sprayed some oil onto the BCG and it did the same thing again. Any ideas...
  8. News Feeds
    I have noticed several questions on the forum recently focused on lubrication and maintenance of the carbine. So, I thought I'd post some generalized guidelines for maintenance, cleaning and lubrication. If followed, these guidelines will keep your carbine functioning optimally with minimum...
1-8 of 8 Results
Top