New York Firearms Forum banner

650

  1. Wanted
    If anyone has either one that they aren't using I'm in the market.
  2. Ammunition and Reloading
    I would like to start reloading 30-06 with my 650 if it is practical. I have reloaded thousands of 9mm, but this will be my first necked cartridge. I am leaning towards dedicating a 650 tool head for case prep and then another for loading. After reading I am not sure what I am goign to get for...
  3. Ammunition and Reloading
    Everything is in reference to a 45 ACP. I do not like the crimp die on my Dillon. I thought it was defective. They sent me a new one. The crimp looks the same. What would be a good crimp die that would work in a Dillon XL 650 press? Once I have one I like I have two Dillon crimp dies that will...
  4. Ammunition and Reloading
    On the down stroke after the case has been slightly flared and the powder has gone in the case is getting stuck on the flaring funnel. I have it set for a very small flare. I had it set to what the manual said about 20 thousandths on an inch of a bell larger than the case size. Now what is...
  5. Ammunition and Reloading
    My new press arrived yesterday and I spent the evening unpacking, watching the video, & setting it up. I do have one problem. I plan on calling Dillon today, but thought I might get a quick answer here. When the case feeds into station 1 it is not going entirely into the shell plate (about 50%...
  6. Ammunition and Reloading
    I have started my research on which rig to get...Would like to get some opinions from the knowledgable folks here! I have decided that I will be going with a Dillon for sure. I will be loading pistol 9/45. I was certain I wanted to go for the 650, but the more I read the more doubts I have...
  7. Off-Topic
    I have quit smoking at least 10 times over 20 years. I know it is terrible for you, no lectures please. Know all the benefits of quitting. Know just about all the pitfalls of "Breaking" the addiction. I have decided to quit again & my wife says she will buy me a "Loaded" Dillon 650 if I can...
Top